When using the tube bending machine, the elbow elbow can be directly installed on the pipeline according to the connection method, and the equipment is carried out according to the application direction. Under normal circumstances, the equipment can be positioned in any direction in the pipeline, but it needs easy-to-operate inspection. Note that the flow direction of the cut-off elbow should be upward from the vertical valve flap, and the elbow can only be horizontal equipment. When the elbow is in the equipment, pay attention to the tightness to avoid leakage and affect the normal operation of the pipeline.
In addition, the primary influence of the bending forming speed of the tube bending machine on the forming quality is: Too fast, simply form the flattening of the curved part of the pipe, and the roundness does not meet the requirements, resulting in cracks and breaks of the pipe; too slow, simple formation The wrinkling of the catheter and the slipping of the compression block, the large diameter pipe is easy to cause the tortuous part of the catheter to sink. In view of the large number of tests on these two CNC tube bending machine, it is advisable to determine the tortuous speed of the pipe at 20%-40% of the maximum tortuous speed of the machine.