The bending machine is to use the equipped mold to bend the cold metal sheet into various geometric cross-sectional shapes. The bending machine generally adopts the special CNC system for the bending machine, and the coordinate axis of the bending machine has been developed from a single axis. Up to 12-axis, the numerical control system can automatically realize the sliding depth control, the left and right tilt adjustment of the sliding block, the front and back adjustment of the rear stopper, the left and right adjustment, the pressure tonnage adjustment and the slider approaching speed adjustment, etc. The bending machine can easily realize the actions of slide down, jog, continuous, pressure holding, return and stop in the middle, and can bend multiple elbows of the same angle or different angles in one feeding.
When using the CNC bending machine, it is necessary to strictly abide by the Huade machine tool safety operating regulations, and wear labor protection equipment according to the regulations. Before starting, you must carefully check whether the motor, switch, circuit and grounding are normal and firm, and check that the control parts and buttons of the equipment are stuck in the correct position. Check the overlap and firmness of the upper and lower molds; check whether each positioning device meets the requirements of being processed.